Caption:
(1) Hour hand
(2) Minute hand
(3) Crown
(4) Second hand

Calibre/Machinery: Quartz movement with three hands (hour, minute and second), manufactured in Japan by SEIKO EPSON.

Watchbands: Produced with polymeric materials, 100% PVC free.

How to lift the crown: Lightly rotate the crown and then pull until it lifts from its original position.

How to tighten the crown: Press down on the crown until it returns to its original position.

Lightly rotate the crown and then pull until it lifts from its original position. Next, set the time by rotating the crown in the desired direction. To finish, press down on the crown until it returns to its original position.

When the battery dies, replace it as soon as possible to prevent any potential component malfunction. You can replace the battery of your ZEE at any traditional watch store. The SEIKO EPSON mechanism (Calibre/Machinery) was developed so as to ensure high precision and to, simultaneously, reduce energy consumption, thereby guaranteeing a battery life of 2 years.

If “water resistant” is not written on the back of the watch, then the watch is not protected against water, thus the user should take special care not to wet the watch, given that water may damage the proper functioning of the watch.

Your watch functions with stable precision between 5º and 35º Celsius (41º and 95º Fahrenheit). Exposure to high temperatures (above 60º Celsius or 140º Fahrenheit) may damage the components and shorten the battery life.

Do not expose your watch to very low temperatures for long periods of time, given that the cold can provoke deceleration and acceleration of the watch’s hands. However, these situations will be overcome once the watch returns to its normal temperature.

Slight vibrations may affect the proper functioning of the watch. Also, be careful to avoid hitting the watch against hard surfaces, as this may cause damage to the watch.

The watch is affected by high levels of magnetism. Contact of the watch with magnetic objects may provoke deceleration or acceleration of the watch’s hands. However, the normal precision of the watch’s hands will return once the watch is removed from the magnetic fields.

Be careful not to expose your watch to solvents, mercury, cosmetic sprays, detergents, adhesives or paints, as the watch components may become discouloured, deteriorated or damaged.